• Css Template Preview
  • Css Template Preview
  • Css Template Preview
  • Css Template Preview
   Kinco PLCs
   Expansion I/O Module
     PM323
     PM332
     PM331
     PM322
     PM321
   CPU Module
     CPU304
     CPU304EX
     CPU306EX
     CPU306
     CPU308
Partner
Product Location:Home - Products - PLC
   CPU304
CPU304
 
 
Technical Specification
Performance Indexes
CPU304
K304-14AT
K304-14AR
K304-14AX
CPU
16-bit industrial
Execution speed
Typical Bool instruction time: <1μS
Word operation time: <96μS
Arithmetic operation time for integers: <130μS
Arithmetic operation time for floating points: <300μS
DI Points
8XDC24V
DO Points
6XDC24V
6Xrelay
3XDC24V+3Xrelay
User Program Memory
EEPROM, 8KB
Program Backup
Permanent storage, without the need of battery//1000 instructions
Memory Area
Variable storage area (V area): 2KB
System storage area (SM area): 300 bytes
Internal storage area (M area): 32 bytes
Data Retention Characteristic
Configure with the programming software: V area, C (counter) area
Retention Mode and Period
Adopt super capacitors and support a retention period of not less than 144 hours upon power failure under normal temperature.
Data Backup Characteristic
Perform backup operations VB1648 ~ VB1775 according to user instructions, 128 bytes in total
Backup Mode and Time
EEPROM (writing operation for 1 million times) permanent backup
Floating Points
Supported; the whole V area can be used for floating points
Programming Language Supported
Ladder Drawing (LD), Instruction List (IL)
Instruction Set
Basic instructions: 55; expansion instructions: 251
Password
Protection
Yes
Max. I/O
Digital data: 14 in total (DI8, DO6);
Analog data: None
Counter
64
Operation Mode of Counter
Addition, subtraction
Counter Range
-32768~32767
Counting Value Retention Function
Yes
Timer
64
1 ms time base: 4
10 ms time base: 16
100 ms time base: 44
High-speed Counter
2 single/dual-phase high-speed counters
Where, single-phase counter with a maximum frequency of 20KHz
dual-phase counter with a maximum frequency of 10KHz
Pulse Output
2, PTO (Pulse Train Output)/PWM (Pulse Width Modulation output);
Maximum output frequency: 20 KHz
Analog Potentiometer
-
Interruption Function
Timing interruption: 2, 1ms resolution;
Timer interruption: T2/T3, 1ms resolution;
Edge interruption: 4, rising edge or falling edge optional;
High-speed interruption, communication interruption
Real-time Clock
-
Number of Connectable Expansion Modules
-
COM Port
1, RS232 or RS485;
Supported working modes: Programming, Modbus-RTU (slave), Free protocol
Equipment Connected with COM Port
RS232/RS485: PC (for programming), third-party HMI panel, third-party serial communication equipment (for example, instruments, bar code reader, etc.)
Input Power Supply
AC85~265V
Sensor Load Power Supply
DC24V, max. 300 mA
Dimensions (L*W*H)
97X114X70mm
 
 
Untitled Document
Home | Thailand | Job & Career | Contact Us | Corp Email
Copyright 2010 Automation Design and Consultant Co., Ltd.