• Css Template Preview
  • Css Template Preview
  • Css Template Preview
  • Css Template Preview
   Kinco PLCs
   Expansion I/O Module
     PM323
     PM332
     PM331
     PM322
     PM321
   CPU Module
     CPU304
     CPU304EX
     CPU306EX
     CPU306
     CPU308
Partner
Product Location:Home - Products - PLC
   PM323
PM323
Features
K323-08DTX
 8 transistor output channels, totally classified into 2 groups, our channels in each group, and each channel can be used as DI or DO;
Rated power supply voltage: DC24V;
Rated output voltage: DC24V; Maxi
Rated output voltage: DC24V; Maximum output current of each channel: 750mA, source type;
Power input protection;
Inductive load output protection;
Short circuit protection (protected if the output current is greater than 3A);
Parallel connection of DO channels
Photoelectric isolation between field signals and internal circuit.
 
K323-XXDR
 DI 4/8XDC24V, totally classified into 1 group;
The DI channel can either be connected to source input (common cathode) or to sink input (common anode);
Rated input voltage of DI channel: DC24V, with a valid voltage range of 15~30V;
Photoelectric isolation between field signals of DI channel and internal circuit;
DO 4/8 х relay, totally classified into 1 group;
Maximum power supply voltage of DO channel: DC30V/AC270V;
Maximum output current of each DO channel: 3A(DC30V/AC270V).
 
Technical Specification
 
 
Electric parameters
K323-08DTX
Number of channels
8, can serve as DI or DO
Input/output type
Source type
Rated power supply voltage
DC24V
Rated output voltage
DC24V
Maximum output current
750mA@24VDC
Output impedance
Maximum: 0.2Ω
Output delay
* ON delay
* OFF delay
 
0.3-5µs
5µs
Rated input voltage
DC24V (“1” FOR DC15~30V)
Rated input current
Maximum input voltage of logic “0”
Minimum input voltage of logic “1”
Input filter delay
5ms
Isolation between signal and internal logic circuit
* mode
* Voltage
 
Photoelectric coupler
1500VAC/1 minute
Inductive load output protection
Available
Short circuit protection
Available (protected if the output current of each group is greater than 3A)
Parallel connection of channels
Available
Current loss of expansion bus
5V
<95.7Ma
24V
-
Status indication
A green LED indicates signal “1” of each channel
Occupied address space
DI image area
1 byte
DO image area
1 byte
Dimensions and weight
 
Dimensions (L*W*H)
114X50X70mm
 
Net weight
130g
 
Wiring Diagram
 
 
 
Electric parameters
K323-08DR
K323-16DR
Number of input channels
4 (4 channels/group)
8 (8 channels/group)
Input type
Source/sink
Rated input voltage
DC24V (“1” for DC15~30V)
Rated input current
Maximum input voltage of logic “0”
Minimum input voltage of logic “1”
Input filter delay
5ms
Isolation between input and internal logic circuit
* mode
* Voltage
 
Photoelectric coupler
1500VAC/1 minute
Number of output channels
4 relay (4 channels/group)
8 relay (4 channels/group)
Power supply voltage for output
Maximum: DC30V/AC270V
Maximum output current of each channel
3A(DC 30V/AC270V)
Maximum output current of each group
10A
Output ON delay time
10ms (Max.)
5ms (typical value)
Output OFFN delay time
5ms (Max.)
3ms (typical value)
Maximum switch frequency of relay
*No-load
*Rated load
 
12,000 times/minute
100 times/minute
Expected life of relay contact
*Mechanical life (no load)
*Electric life (rated load)
20,000,000 times
100,000 times
Output isolation characteristics
* mode
*Isolation voltage between coil and contact
* Isolation voltage between contacts
Relay
2000Vrms
1000Vrms
Relay
2000Vrms
750Vrms
Current loss of expansion bus
5V
<67.4Ma
<97.8Ma
24V
<22.0mA
<42.0Ma
Occupied address space
DI image area
1 byte
DO image area
1 byte
Dimensions and weight
Dimensions (L*W*H)
114X50X70mm
114X75X70mm
Net weight
145g
160g
 
 
Untitled Document
Home | Thailand | Job & Career | Contact Us | Corp Email
Copyright 2010 Automation Design and Consultant Co., Ltd.